giggift.blogg.se - Orbiter extruder v2.0

#Orbiter extruder v2.0 mod#

I highly recommend using the sensorless mounts instead, along with the Happy Hare ERCF software. There are a few inherent issues with the sensored mount so I do not recommend them. Stealthburner Buildįilament sensor (for the filament sensor version): There is a variation of the standard mount to incorporate a filament sensor below the extruder. Has a hinge feature integrated into the mount, to attach an aesthetic stealthburner shroud.Works with cable chains or canbus boards.

#Orbiter extruder v2.0 mod#

This mod aims to mount the Orbiter V2.0 extruder to the Voron Stealthburner. Note that a filament sensor is not explicitly required anymore, but has been kept for legacy reasons. Voron Stealthburner Orbiter V2.0 mount, with can bus toolhead support. Has an integrated filament sensor beneath the extruder for ERCF.Compatible with the Crown Cooler system.

A slightly modified version of the stealthburner fan shroud has been included to allow access to the orbiter filament lever.

It is fully compatible with the rest of the stealthburner system of hot ends & shrouds.

Tip: With its revised and optimised design, the Orbiter V2.0 is the perfect fit for Delta printers.This mod aims to mount the Orbiter V2.0 extruder to the Voron Stealthburner & crowncooler assembly. ► An additional filament sensor has been equipped with an automatic charge and discharge button ► The position of the motor has been rotated by 10 degrees to facilitate its maintenance and installation ► The design of the PTFE inlet coupling has been improved and reduced in size ► The gap between the stainless steel filament exit guide and filament feeding mechanisms is about 0.2-0.3mm, ensuring the best TPU printing experience Brand new original LDO Motors Orbiter v2.0 Extruder for 1.75mm filament. ► Mounting screws are in line with the filament exit path, increasing the rigidity of the housing as well as making assembly easier ► The perfectly aligned filament path results in a higher extrusion force ► A clamping mechanism with a clamping screw (captive grab screw) has been added for a better grip ► The PEEK gear sleeve has been revised and is now made of a hard and more mechanically resistant material LDO Orbiter 2.0 Extruder 1.75mm NEW 2022 Shorter hardened drive gears 11mm vs 15mm manufactured by Bondtech Weight reduced to 135 grams Smaller more compact. ► The Dupont Delrin planetary gear makes very little noise and has low friction ► The extremely powerful LDO-36STH20-1004AHG LDO stepper motor provides excellent performance with a retraction speed of 120 mm/s and acceleration of up to 8000 mm/s² ► The weight has been reduced to about 135 grams

Other features compared to the previous version: The extruder is extremely wear-resistant, making it suitable for applications with abrasive materials. I have already shown in the story of Orbiter v2.0 how the filament contact surface is influenced by the drive gear diameter. Changes to the motor design contribute to the Orbiter V2.0's approximately 40% higher extrusion force and better acceleration performance compared to the previous V1.5 version. The gears have been reversed, which means the filament path is now closer to the extrusion center. The Orbiter V2.0 features Bondtech-quality hardened dual drive gears, shortened to 11mm, that grip filament from both sides. The extruder is made of qualitative components such as an injection-moulded housing (GPA12) resistant to high temperatures up to 200 ☌ and hardened gears from Bondtech, which help it to achieve more mechanical performance and a higher success rate. Features: Filament runout detection Filament auto loading Push button activated filament unloading Please see below for details and technical datasheet. Smaller more compact dimensions (11.6 shorter) New motor design offers 40 increase in pushing force in real printing conditions and improved acceleration performance. Shorter drive gears (11mm vs 15mm) Weight reduced to 135 grams. Multi functional addon for the Orbiter V2 direct drive extruder. Genuine Bondtech hardened dual filament drive gears.

Now shipping v2.2, click here for improvements. Orbiter Extruder V2.0 is a direct drive extruder for 1.75 mm filaments that has been optimised in many ways compared to its predecessor, as well as being lighter, more compact and shorter. LDO Orbiter Extruder v2.0 Filament Sensor 19.99 In stock, ready to ship.